Stay informed

Subscribe to email updates

Subscribe to our mailing lists to keep up with the latest news and updates from Measurement Canada. The number of emails you will receive will vary from month to month.

Once you subscribe, you will receive a confirmation email. You may unsubscribe at any time and your email address will never be disclosed.

Mailing lists









View recently updated documents

View document updates from the current and previous year.

Filter your search results

Filter your search results

Use the filter below to narrow your search results.

Recently updated documents
Title Date Description
GS-ENG-09-01—Requirements for the certification by correlation of gas measuring apparatus—Working level bell provers This document outlines the requirements for the certification, recertification, calibration and use of working level gas measuring apparatus using bell provers up to 10 ft3 capacity.
Application of PS-G-04—Provisional Specifications for the Verification and Reverification of Turbine Gas Meters With High-Pressure Test Certificates This information bulletin is intended to communicate Measurement Canada’s policy on the application of PS-G-04—Provisional Specifications for the Verification and Reverification of Turbine Gas Meters With High-Pressure Test Certificates until such time as it is revoked.
TE-LP-003—Laboratory practice for the selection, calibration and use of direct reading thermometers The purpose of this document is to provide recommended practice for the selection, calibration and use of direct reading digital thermometers that will be used for calibration and inspection work conducted by Measurement Canada (MC) staff or accredited or registered organizations.
G-03—Natural gas meters and ancillary devices qualified for a lengthened initial reverification period This bulletin provides an official record of natural gas meters and ancillary devices qualifying for a lengthened initial reverification period pursuant to Measurement Canada specifications S-EG-01 and S-S-05 and meters no longer qualifying for a lengthened initial reverification period
Regulations Amending the Weights and Measures Regulations Measurement Canada announces the registration of the amendments to section 29 of the Weights and Measures Regulations (Regulations).
G-02—Temporary permission for putting gas metering devices into service without sealing The purpose of this bulletin is to establish policy requirements for granting temporary permission to place gas metering devices into service without sealing and to clarify the types of modifications that may be made to such devices without triggering the need for reverification.
GEN-48—Examination sticker placement This bulletin applies to devices examined under the Weights and Measures Act.
EL-ENG-09-03—Uncertainty determination for electricity meter verification tests This document provides guidelines for establishing uncertainties when verifying single phase and polyphase electronic energy and demand meters.
EL-ENG-09-02—Uncertainty determination of electricity meter types This document establishes a procedure for determining the uncertainty of electricity meter types.
Information bulletin: New requirements for the approval and use of loss compensation metering In March 2014, Measurement Canada (MC) and the Canadian Electrical Association (CEA) formed the Electricity Loss Compensation Joint Working Group, which developed type approval and use requirements for loss compensation metering. The final documents were posted for public consultation on Measurement Canada's website from February 10, to March 31, 2016.
Changes have been made to the specifications and policies for loss compensation metering in consideration of comments received during consultation. The following documents have now been authorized and published on Measurement Canada's website.
P-G-18—Procedure for the verification and reverification of gas chromatographs pursuant to the requirements of PS-G-18 This procedure applies to online and laboratory gas chromatographs approved by Measurement Canada to perform compositional analyses of natural gas samples and calculate their resulting energy density and relative density values.
Bulletin GEN-47: Initial examinations conducted at a factory This bulletin applies to authorized service providers (ASPs) who conduct initial examinations of devices at a factory.
Doors Open Ottawa Measurement Canada is participating in Doors Open Ottawa!
Amendments to the schedules of the Weights and Measures Act Measurement Canada announces the registration of amendments to Schedules I—Units Based on the International System of Units and to Schedule IV—Reference Standards of the Weights and Measures Act.
PS-G-18—Provisional specifications for the verification and reverification of gas chromatographs These provisional specifications apply to online and laboratory gas chromatographs approved by Measurement Canada (MC) to perform compositional analyses of natural gas samples and calculate their resulting energy density and relative density values for use in trade and custody transfer metering applications.
Consultation on thermal energy meters You're invited to provide comments on the proposal to begin regulating thermal energy meters (also called BTU (British thermal unit) meters and heat meters).
S-G-07—Specifications for the approval, verification, reverification, installation and use of electronic gas metering devices incorporating mass to base volume and/or energy conversion functions These specifications apply to electronic gas metering devices incorporating a function or functions that convert their registered units of mass or mass flow rate, as measured by a Coriolis-type mass flow meter, to accumulated units of base volume and/or energy.
S-G-03–Specifications for the approval of type of gas meters, ancillary devices and associated measuring instruments The purpose of these specifications is to establish the metrological, technical, marking, sealing/security, administrative and performance test requirements for the approval of gas meters, ancillary devices and associated measuring instruments based on any measurement technology or principle that is used to measure the quantity or properties of gas at operating conditions.
Information bulletin—Introduction of reporting requirements for electricity and natural gas meters Commencing January 1, 2017, electricity and natural gas meter owners and authorized service providers are required to report meter data as required by sections 11 and 28 of the Electricity and Gas Inspection Regulations.
Electric vehicle charging stations Electric vehicle charging stations must comply with different federal measurement laws depending on how the electricity is sold.
E-31—Implementation of policies and specifications relating to standardized electricity energy and demand legal units of measure This bulletin outlines Measurement Canada's (MC) schedule for the implementation of the policies and specifications on standardized electricity energy and demand legal units of measure (LUMs) established both within and outside of an approved electricity meter. Also included are implementation timelines and accommodation policies for existing meters and metering installations.
PS-E-18—Provisional specification for the approval of type of electricity meters and auxiliary devices used in determining standardized legal unit of measure values outside a meter This provisional specification applies to certain electricity meters and auxiliary devices submitted for approval pursuant to LMB-EG-07—Specifications for Approval of Type of Electricity Meters, Instrument Transformers and Auxiliary Devices.
Second consultation on the integration of LMB-EG-08 with S-G-03 Measurement Canada (MC) is seeking comments from the public and industry stakeholders on changes to draft revision 1 of specification S-G-03 that integrates specification LMB-EG-08 on gas meter type approvals and further updates.
Field Inspection Manual — Volumetric Measuring Devices Part 4, Section 44: This test applies to all liquid measuring devices that are equipped with an automatic pressure compensator.
S-01—Implementation guide for the application of statistical sampling requirements The purpose of this bulletin is to provide guidance on the interpretation and application of Measurement Canada's (MC) acceptance and reverification period lengthening sampling plans, S-S-series.
Volume correction factors—liquefied petroleum gas or propane Volume correction factors—liquefied petroleum gas or propane.
G-03—Natural gas meters and ancillary devices qualified for a lengthened initial reverification period The purpose of this bulletin is to provide an official record of those gas meters that have qualified for a conditionally or unconditionally lengthened initial reverification period pursuant to Measurement Canada specifications S-EG-01 and S-S-05 and those meters that no longer qualify for a lengthened initial reverification period.
E-35—Policy on the retention of metering information and legally relevant interval data used in billing applications The purpose of this bulletin is to provide a policy on the application of the requirements of section 11 of the Electricity and Gas Inspection Regulations regarding the retention of metering information and legally relevant interval data used in billing applications.
S-EG-02—Specifications for approval of physical sealing provisions for electricity and gas meters S-EG-02—Specifications for approval of physical sealing provisions for electricity and gas meters.
PS-EG-02—Provisional specifications for the means and methods of physically sealing verified electricity and gas meters PS-EG-02—Provisional specifications for the means and methods of physically sealing verified electricity and gas meters.
GEN-25—Policy on electricity and gas legal units of measurement and functions used for billing The purpose of this bulletin is to clarify Measurement Canada's policy for the approval and verification of electricity and gas meters with regards to the application and use of legally relevant parameters, functions and units of measurement for billing.
Volume correction factors—lubricating oils Volume correction factors—lubricating oils.
Volume correction factors—Jet B Volume correction factors—Jet B.
Volume correction factors—Jet A, Jet-A1, jet kerosene, turbine fuel Volume correction factors—Jet A, Jet-A1, jet kerosene, turbine fuel.
Volume correction factors—aviation gasoline Volume correction factors—aviation gasoline.
GEN-42—Policy for the renewal of electricity and gas meters GEN-42—Policy for the renewal of electricity and gas meters.
Publication of PS-G-17—Provisional specifications for the in situ verification, reverification, installation and use of pressure factor metering installations Measurement Canada's (MC) requirements for the verification, reverification, installation and use of single meter pressure factor metering (PFM) installations have been divided among a number of different documents, some of which have been in effect for a considerable number of years.
Field inspection manual—automatic weighing devices Field inspection manual—automatic weighing devices.
E-28—Qualification of electricity meters for lengthened initial reverification period of 10 years The purpose of this bulletin is to officially communicate the electronic electricity meters that have been conditionally and unconditionally qualified for a 10-year initial reverification period pursuant to Measurement Canada specifications S-EG-01 and S-S-05.
Date modified: